Menu
Your Cart

If  any  need  to  contact ,        email  first ,        Email: [email protected];      Skype:amycheers1


RFM219S-433S1

RFM219S-433S1
RFM219S-433S1
RFM219S-433S1
RFM219S-433S1
RFM219S-433S1
RFM219S-433S1
RFM219S-433S1
  • Stock: 2000
  • Brand: HPRF
  • Model: RFM219S-433S1
  • Weight: 0.00kg
  • Dimensions: 20.00cm x 20.00cm x 6.00cm
Products Sold: 0
Product Views: 476
$0.90
This product has a minimum quantity of 10

RFM219S-433S1,1.8-3.6V,433MHZ,FSK/GFSK/OOK RX Module  


Descriptions

The RFM219S is an ultra low power, high performance, OOK and (G)FSK receiver for various 300 to 960 MHz wireless applications. It is part of the HOPERF NextGenRFTM family, which includes a complete line of transmitters, receivers and transceivers. All features can be configured either by off-line EEPROM programming or on-line registers writing. The configuration file to be written,into the registers is generated by the smart RFPDK. The RFM219S operates from a supply voltage of 1.8 V to 3.6V, when it is always on, it consumes only 5.7 mA current while achieving -109 dBm receiving sensitivity (FSK, 9.6 ksps symbol rate, 868.35 MHz), and only 60 nA sleep current for superior battery life. The device supports packet handling, 32-byte FIFO, Manchester decoding and data de-whitening for the received data processing. Besides the demodulated data and the sync clock, the device can also,send out the power-on reset, the system clock, as well as 2 configurable interrupts for the external device. RFM219S receiver together with the CMT211xA transmitter enables a powerful RF link.


Features

  • Embedded EEPROM
  •  Very Easy Development with RFPDK
  •  All Features Programmable
  • Frequency Range: 300 to 960 MHz
  •  FSK, GFSK and OOK Demodulation
  • Symbol Rate: 0.1 to 100 ksps
  •  Sensitivity: -109 dBm @ 9.6 ksps, FSK, 868M Hz
  •  4-wire SPI Interface
  •  Direct, Buffer and Packet Mode Supported
  • Configurable Data Handler and 32-Byte FIFO
  •  Manchester Decoding and Data De-Whitening
  •  Supply Voltage: 1.8 to 3.6 V
  • Low Power Consumption: 5.7 mA
  •  Low Sleep Current:60 nA when Sleep Timer Off,440 nA when Sleep Timer on
  •  RoHS Compliant
  • Module Size: 16 *1 6 5 .0mm


Applications

  •  Low-Cost Consumer Electronics Applications
  • Home and Building Automation
  •  Infrared Receiver Replacements
  •  Industrial Monitoring and Controls
  • Remote Automated Meter Reading
  •  Remote Lighting Control System
  •  Wireless Alarm and Security Systems
  •  Remote Keyless Entry (RKE)

Write a review

Note: HTML is not translated!
Bad Good
Tags: HPRF
This is the sticky Notification module. You can use it for any sticky messages such as cookie notices or special promotions, etc.